MAGUS Lum D400L
83018
€
4899,95
MAGUS Lum D400L Fluorescence Digital Microscope
With a camera. Magnification: 40–1000x. Trinocular head, plan achromatic and plan fluorite objectives, reflected light sources – 4 LEDs 5W of different wavelengths, transmitted light source – LED 3W, Köhler illumination in reflected and transmitted light
The microscope is designed for studying specimens using the fluorescence microscopy technique in reflected light and brightfield technique in transmitted light. The additional equipment allows for darkfield, polarization and phase contrast microscopy. Fluorescence microscopy is based on the ability of some substances to glow when exposed to the light of a certain part of the spectrum. The specimens are exposed to invisible short-wave ultraviolet light or violet, blue, and green light. The wavelength of the emitted light will be longer than the wavelength of the excitation light. The specimen glows blue, cyan, green-yellow, or red light, respectively. Some specimens glow by themselves while others glow after treatment with fluorochromes. The fluorescent microscope is used to study pathogens of tuberculosis, chlamydia, rabies, herpes, and other diseases. The microscope can also be used for DNA and chromosome analysis, bone marrow and blood smears, forensic and pharmacological examination, veterinary control studies, and sanitary and epidemiological inspection.
With a camera. Magnification: 40–1000x. Trinocular head, plan achromatic and plan fluorite objectives, reflected light sources – 4 LEDs 5W of different wavelengths, transmitted light source – LED 3W, Köhler illumination in reflected and transmitted light
The microscope is designed for studying specimens using the fluorescence microscopy technique in reflected light and brightfield technique in transmitted light. The additional equipment allows for darkfield, polarization and phase contrast microscopy. Fluorescence microscopy is based on the ability of some substances to glow when exposed to the light of a certain part of the spectrum. The specimens are exposed to invisible short-wave ultraviolet light or violet, blue, and green light. The wavelength of the emitted light will be longer than the wavelength of the excitation light. The specimen glows blue, cyan, green-yellow, or red light, respectively. Some specimens glow by themselves while others glow after treatment with fluorochromes. The fluorescent microscope is used to study pathogens of tuberculosis, chlamydia, rabies, herpes, and other diseases. The microscope can also be used for DNA and chromosome analysis, bone marrow and blood smears, forensic and pharmacological examination, veterinary control studies, and sanitary and epidemiological inspection.
Digital camera
The MAGUS CLM10 digital camera is designed for use in fluorescence and darkfield microscopy techniques.
The camera is equipped with a 2.3MP sensor and produces realistic images at a resolution of 1920х1200px. It is recommended for 40x, 60x, and 100x objectives. When observing with medium magnification objectives, the camera will show finer details.
Video is recorded at 120fps at maximum resolution. Videos are smooth, with soft and subtle transitions between frames. The movement of the object is displayed in real time with no delays. The camera makes it easy to work with objects that are moving and is suitable for classroom demonstrations.
The camera is equipped with a USB3.0 interface. The data transfer speed is 10 times faster than USB2.0 cameras. The high-speed camera is recommended for professional laboratories, research, or university training.
Microscope head
Trinocular head with infinity-corrected optics. Eyepiece tubes can rotate 360°. The user can adjust eye relief on the eyepiece to fit their height. The digital camera is mounted in the trinocular tube.
Revolving nosepiece
Five objectives. A free slot is used for centering the reflected light source. An additional objective can also be installed in the free slot in order to achieve extra magnification.
The revolving nosepiece with objectives is oriented toward the interior – the user can see the objective inserted into the optical path, and the space above the stage is free.
Objectives
Infinity plan achromatic objectives and infinity plan fluorite objectives. Standard configuration includes 4x, 10x, and 100x objectives for brightfield microscopy and a 40x objective for fluorescence microscopy.
Focusing mechanism
Coaxial coarse and fine focusing knobs are located at the base of the microscope on both sides. The user can place their hands on the table and take a relaxed pose while observing. The focusing adjustment is smooth and effortless. On the right, there is a coarse focusing lock knob for quick adjustments after changing the specimen. On the left, there is a coarse tension adjustment ring for further adjustment.
Stage
The stage does not have an X-axis positioning rack, which ensures its ergonomic operation. The mechanical stage with a belt-driven mechanism allows for the smooth movement of the object. The slide holder is fixed with two screws and can be removed for easy operation. For reflected light observations, a black stage plate should be placed on the stage to remove stray light.
Reflected light illuminator
The fluorescence excitation light source: 5W LEDs of four wavebands: blue (B), green (G), violet (V), and ultraviolet (UV). The LEDs can be changed by rotating the ring. The LEDs will instantaneously reach full brightness, won’t heat up during prolonged use, and will turn off quickly when needed. It makes it easy to switch from the brightfield technique to fluorescence and back again. The lifetime of the LEDs is 50,000 hours. It is recommended to choose an LED-based fluorescence microscope for educational purposes as the safest and low-maintenance option.
Köhler illumination in reflected and transmitted light
Setting up the Köhler illumination enhances the image quality of a specimen. With such illumination, you can achieve maximum resolution on each objective and uniform illumination of the field of view with no darkening at the edges. The object of study is in sharp focus, and the image artifacts are removed.
Condenser
The condenser has a slot for a darkfield slider or a phase contrast slider. The usage of the slider saves time when switching between microscopy techniques in transmitted light.
Transmitted light source
The transmitted light illuminator has a 3W LED. The color temperature does not change when adjusting the brightness. The LED has a lifespan of 50,000 hours.
Accessories
There is a line of accessories designed for the microscope. Optional objectives provide additional magnification. The optional 10x/0.35 fluorite objective is used for capturing an image of a specimen with a resolution of 0.5μm over a large field of view. Eyepieces that extend the magnification range of the microscope. Optional eyepieces help you maximize the potential of the objective you use most often. A phase contrast device, a darkfield condenser, and a polarization device offer more microscopy techniques so that you can study the specimens that are invisible in brightfield or fluorescent light. A digital camera that outputs the microscope image on a monitor and stores files along with software that takes real-time measurements of specimens. A calibration slide for measuring objects that can be combined with an eyepiece with a scale or the camera software.
The MAGUS CLM10 digital camera is designed for use in fluorescence and darkfield microscopy techniques.
The camera is equipped with a 2.3MP sensor and produces realistic images at a resolution of 1920х1200px. It is recommended for 40x, 60x, and 100x objectives. When observing with medium magnification objectives, the camera will show finer details.
Video is recorded at 120fps at maximum resolution. Videos are smooth, with soft and subtle transitions between frames. The movement of the object is displayed in real time with no delays. The camera makes it easy to work with objects that are moving and is suitable for classroom demonstrations.
The camera is equipped with a USB3.0 interface. The data transfer speed is 10 times faster than USB2.0 cameras. The high-speed camera is recommended for professional laboratories, research, or university training.
Microscope head
Trinocular head with infinity-corrected optics. Eyepiece tubes can rotate 360°. The user can adjust eye relief on the eyepiece to fit their height. The digital camera is mounted in the trinocular tube.
Revolving nosepiece
Five objectives. A free slot is used for centering the reflected light source. An additional objective can also be installed in the free slot in order to achieve extra magnification.
The revolving nosepiece with objectives is oriented toward the interior – the user can see the objective inserted into the optical path, and the space above the stage is free.
Objectives
Infinity plan achromatic objectives and infinity plan fluorite objectives. Standard configuration includes 4x, 10x, and 100x objectives for brightfield microscopy and a 40x objective for fluorescence microscopy.
Focusing mechanism
Coaxial coarse and fine focusing knobs are located at the base of the microscope on both sides. The user can place their hands on the table and take a relaxed pose while observing. The focusing adjustment is smooth and effortless. On the right, there is a coarse focusing lock knob for quick adjustments after changing the specimen. On the left, there is a coarse tension adjustment ring for further adjustment.
Stage
The stage does not have an X-axis positioning rack, which ensures its ergonomic operation. The mechanical stage with a belt-driven mechanism allows for the smooth movement of the object. The slide holder is fixed with two screws and can be removed for easy operation. For reflected light observations, a black stage plate should be placed on the stage to remove stray light.
Reflected light illuminator
The fluorescence excitation light source: 5W LEDs of four wavebands: blue (B), green (G), violet (V), and ultraviolet (UV). The LEDs can be changed by rotating the ring. The LEDs will instantaneously reach full brightness, won’t heat up during prolonged use, and will turn off quickly when needed. It makes it easy to switch from the brightfield technique to fluorescence and back again. The lifetime of the LEDs is 50,000 hours. It is recommended to choose an LED-based fluorescence microscope for educational purposes as the safest and low-maintenance option.
Köhler illumination in reflected and transmitted light
Setting up the Köhler illumination enhances the image quality of a specimen. With such illumination, you can achieve maximum resolution on each objective and uniform illumination of the field of view with no darkening at the edges. The object of study is in sharp focus, and the image artifacts are removed.
Condenser
The condenser has a slot for a darkfield slider or a phase contrast slider. The usage of the slider saves time when switching between microscopy techniques in transmitted light.
Transmitted light source
The transmitted light illuminator has a 3W LED. The color temperature does not change when adjusting the brightness. The LED has a lifespan of 50,000 hours.
Accessories
There is a line of accessories designed for the microscope. Optional objectives provide additional magnification. The optional 10x/0.35 fluorite objective is used for capturing an image of a specimen with a resolution of 0.5μm over a large field of view. Eyepieces that extend the magnification range of the microscope. Optional eyepieces help you maximize the potential of the objective you use most often. A phase contrast device, a darkfield condenser, and a polarization device offer more microscopy techniques so that you can study the specimens that are invisible in brightfield or fluorescent light. A digital camera that outputs the microscope image on a monitor and stores files along with software that takes real-time measurements of specimens. A calibration slide for measuring objects that can be combined with an eyepiece with a scale or the camera software.
Key features of the microscope:
Key features of the camera:
- Study of specimens emitting fluorescence when exposed to excitation light
- Microscopy techniques: fluorescence in reflected light, brightfield in transmitted light
- Trinocular head with adjustable eye relief and a vertical tube for mounting a digital camera
- Reflected light illuminator: four 5W LEDs of different wavelengths
- Fluorescence filters: ultraviolet (UV), violet (V), blue (B), green (G)
- Transmitted light illuminator: energy-saving 3W LED with a lifetime of up to 50,000 hours
- Köhler illumination in reflected and transmitted light
- Simple stage without a positioning rack
- Wide range of compatible optional accessories
Key features of the camera:
- For fluorescence and darkfield microscopy with 40x, 60x, and 100x objectives
- 2.3MP resolution for getting detailed images at high magnification; low noise level, low-power dissipation
- 120fps for observing moving objects, recording video, and moving the sample without jerkiness or delays
- Global shutter for fast signal readout from the sensor, increased image brightness, and no false optical effects when observing moving objects
- SONY Exmor monochrome CMOS backlit sensor provides low noise level and high light sensitivity even in low-light conditions. You will get clearer, brighter, and more color-saturated images.
- USB3.0 interface for fast, smooth data transfer
- Software with photo, video recording, editing, external display functions, linear and angular measurements
- MAGUS CLM10 Digital Camera (digital camera, USB cable, installation CD with drivers and software, user manual and warranty card)
- Stand with built-in power supply, transmitted light source, focusing mechanism, stage, condenser mount, and revolving nosepiece
- Abbe condenser
- Reflected light illuminator
- Lamphouse with LEDs
- Trinocular head
- Infinity plan achromatic objective: PL 4x/0.10 WD 19.8mm
- Infinity plan achromatic objective: PL 10x/0.25 WD 5.0mm
- Infinity plan achromatic objective, fluo: PL FL 40x/0.85 (spring-loaded) WD 0.42mm
- Infinity plan achromatic objective, fluo: PL 100x/1.25 (spring-loaded, oil) WD 0.36mm
- Eyepiece 10x/22mm with long eye relief (2 pcs.)
- Eyepiece eyecup (2 pcs.)
- UV shield
- Filter slider
- Black protective plate for under-stage installation
- C-mount camera adapter
- Color filter (4 pcs.)
- Bottle of immersion oil
- Reflected light illuminator power supply
- Power cord
- Reflected light illuminator power cord
- Power cord of the reflected light illuminator power supply
- Dust cover
- User manual and warranty card
Available on request:
- MAGUS MES10 10х/22mm Eyepiece with scale (D 30mm)
- MAGUS ME12 12.5х/14mm Eyepiece (D 30mm)
- MAGUS ME15 15x/15mm Eyepiece (D 30mm)
- MAGUS ME20 20х/12mm Eyepiece (D 30mm)
- MAGUS ME25 25х/9mm Eyepiece (D 30mm)
- MAGUS 10PLFL 10х/0.35 Plan FL ∞/0.17 Objective
- MAGUS MP20 20х/0.40 ∞/0.17 Infinity Plan Achromatic Objective
- MAGUS MP60 60х/0.80 ∞/0.17 Infinity Plan Achromatic Objective
- MAGUS PH1 Phase Contrast Device
- MAGUS DF1 A 0.9 Darkfield Condenser
- MAGUS DF2 A 1.36–1.25 Oil Darkfield Condenser
- MAGUS DFS1 Darkfield Slider
- MAGUS SPD1 Polarizer/Analyzer Set
- LCD Monitor
- Calibration slide
- MAGUS CFA050 C-mount Adapter
- MAGUS CFA065 C-mount Adapter
Microscope design: upright
Image field: flat-field
Reflected light microscopy techniques: fluorescence
Transmitted light microscopy techniques: brightfield, darkfield (optional), polarized light (optional), phase contrast (optional)
Microscope magnification, x: 40–1000 basic configuration (*optional: 40–1250/1500/2000/2500)
Tube length: infinity (∞)
Microscope head type: trinocular
Microscope head: Gemel head (Siedentopf, 360° rotation)
Inclination: 30°
Microscope head magnification, x: 1
Interpupillary distance, mm: 48–75
Eyepiece diameter, mm: 30
Eyepieces, x/field, mm: 10х/22mm, eye relief: 10mm (*optional: 10x/22mm with a scale, 12.5x/14; 15x/15; 20x/12; 25x/9)
Revolving nosepiece: 5 objectives
Optical design: infinity plan achromatic objectives and infinity plan achromatic objectives, fluo; parfocal distance: 45mm
Objectives, x/aperture/working distance, mm: PL 4x/0.10/19.8; PL 10x/0.25/5.0; PL FL 40x/0.85/0.42; PL 100x/1.25/0.36 (oil) (*optional: PL FL 10x/0.35/2.37; PL 20х/0.40/8.8; PL 60x/0.80 ∞/0.17 WD 0.46mm)
Spring-loaded retractable assembly: 40, 60х, 100x (oil)
Stage: double layer mechanical stage, stage size: 180mm×150mm, without a positioning rack
Moving range, mm: 75/50
Condenser: Abbe condenser, N.A. 1.25, center-adjustable, height-adjustable, adjustable diaphragm, a slot for a darkfield slider and phase contrast slider, dovetail mount
Field diaphragm: adjustable iris diaphragm
Focusing mechanism: coaxial coarse and fine focusing knobs located on both sides
Coarse focusing travel, mm: 21
Coarse focusing travel, mm/circle: 39.8
Fine focusing scale value, μm: 2
Coarse focusing tension adjusting knob: +
Coarse focusing lock knob: +
Illumination: transmitted and reflected light
Reflected light source: 4 LEDs of different wavelengths, 5W
Transmitted light source: 3W LED
Fluorescence filter: filter type, excitation wavelength/dichroic mirror/emission wavelength: ultraviolet (UV), 320–380nm/420nm/435nm; violet (V), 380–415 nm/460 nm/475nm; blue (B), 410–490nm/505nm/515nm; green (G), 475–550nm/580nm/595nm
Phase contrast device: *optional: phase contrast turret condenser, phase contrast objective (10x, 20x, 40x, 100x), centering telescope
Darkfield condenser: *optional: dry darkfield condenser (for use with a dry objective); oil darkfield condenser (for use with a 100x immersion objective lens); darkfield slider
Polarization device: *optional: polarizer is placed on the collector; analyzer is inserted in the slot above the revolving nosepiece
Power supply, V/Hz: AC power supply, 85–265/50/60
Operating temperature range, °C (°F): 5… 35 (41… 95)
Operating humidity range, %: 20… 80
Image field: flat-field
Reflected light microscopy techniques: fluorescence
Transmitted light microscopy techniques: brightfield, darkfield (optional), polarized light (optional), phase contrast (optional)
Microscope magnification, x: 40–1000 basic configuration (*optional: 40–1250/1500/2000/2500)
Tube length: infinity (∞)
Microscope head type: trinocular
Microscope head: Gemel head (Siedentopf, 360° rotation)
Inclination: 30°
Microscope head magnification, x: 1
Interpupillary distance, mm: 48–75
Eyepiece diameter, mm: 30
Eyepieces, x/field, mm: 10х/22mm, eye relief: 10mm (*optional: 10x/22mm with a scale, 12.5x/14; 15x/15; 20x/12; 25x/9)
Revolving nosepiece: 5 objectives
Optical design: infinity plan achromatic objectives and infinity plan achromatic objectives, fluo; parfocal distance: 45mm
Objectives, x/aperture/working distance, mm: PL 4x/0.10/19.8; PL 10x/0.25/5.0; PL FL 40x/0.85/0.42; PL 100x/1.25/0.36 (oil) (*optional: PL FL 10x/0.35/2.37; PL 20х/0.40/8.8; PL 60x/0.80 ∞/0.17 WD 0.46mm)
Spring-loaded retractable assembly: 40, 60х, 100x (oil)
Stage: double layer mechanical stage, stage size: 180mm×150mm, without a positioning rack
Moving range, mm: 75/50
Condenser: Abbe condenser, N.A. 1.25, center-adjustable, height-adjustable, adjustable diaphragm, a slot for a darkfield slider and phase contrast slider, dovetail mount
Field diaphragm: adjustable iris diaphragm
Focusing mechanism: coaxial coarse and fine focusing knobs located on both sides
Coarse focusing travel, mm: 21
Coarse focusing travel, mm/circle: 39.8
Fine focusing scale value, μm: 2
Coarse focusing tension adjusting knob: +
Coarse focusing lock knob: +
Illumination: transmitted and reflected light
Reflected light source: 4 LEDs of different wavelengths, 5W
Transmitted light source: 3W LED
Fluorescence filter: filter type, excitation wavelength/dichroic mirror/emission wavelength: ultraviolet (UV), 320–380nm/420nm/435nm; violet (V), 380–415 nm/460 nm/475nm; blue (B), 410–490nm/505nm/515nm; green (G), 475–550nm/580nm/595nm
Phase contrast device: *optional: phase contrast turret condenser, phase contrast objective (10x, 20x, 40x, 100x), centering telescope
Darkfield condenser: *optional: dry darkfield condenser (for use with a dry objective); oil darkfield condenser (for use with a 100x immersion objective lens); darkfield slider
Polarization device: *optional: polarizer is placed on the collector; analyzer is inserted in the slot above the revolving nosepiece
Power supply, V/Hz: AC power supply, 85–265/50/60
Operating temperature range, °C (°F): 5… 35 (41… 95)
Operating humidity range, %: 20… 80
Sensor: SONY Exmor CMOS
Color/monochrome: monochrome
Megapixels: 2.3
Maximum resolution, pix: 1920х1200
Sensor size: 1/1.2" (11.25x7.03)
Pixel size, μm: 5.86x5.86
Light sensitivity: 1016mV with 1/30s
Signal/noise ratio: 0.15mV with 1/30s
Exposure: 0.244ms–2s
Video recording: +
Frame rate, fps at resolution: 120@1920x1200; ADC digit capacity (bit); 8/12 (selectable)
Place of installation: trinocular tube, eyepieces tube instead of an eyepiece
Image format: *.jpg, *.bmp, *.png, *.tif
Video format: recording: *.wmv, *.avi, *.h264 (Win 8 or newer), *h265 (Win 10 or newer)
Spectral range, nm: 380–650 (with IR filter and anti-reflective filter)
Shutter type: Global shutter
White balance: auto/manual
Exposure control: auto/manual
Software features: image size, brightness, exposure time
Output: USB3.0, 5Gb/s
System requirements: Windows 8/10/11 (32 and 64 bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 2GB RAM, USB3.0 port, CD-ROM, 17" or larger display
Software: MAGUS View
Mount type: C-mount
Body: CNC aluminum alloy
Power supply: DC current, 5V, with the USB port of the PC
Operating temperature range, °C (°F): –10... 50 (14... 122)
Operating humidity range, %: 30… 80
Color/monochrome: monochrome
Megapixels: 2.3
Maximum resolution, pix: 1920х1200
Sensor size: 1/1.2" (11.25x7.03)
Pixel size, μm: 5.86x5.86
Light sensitivity: 1016mV with 1/30s
Signal/noise ratio: 0.15mV with 1/30s
Exposure: 0.244ms–2s
Video recording: +
Frame rate, fps at resolution: 120@1920x1200; ADC digit capacity (bit); 8/12 (selectable)
Place of installation: trinocular tube, eyepieces tube instead of an eyepiece
Image format: *.jpg, *.bmp, *.png, *.tif
Video format: recording: *.wmv, *.avi, *.h264 (Win 8 or newer), *h265 (Win 10 or newer)
Spectral range, nm: 380–650 (with IR filter and anti-reflective filter)
Shutter type: Global shutter
White balance: auto/manual
Exposure control: auto/manual
Software features: image size, brightness, exposure time
Output: USB3.0, 5Gb/s
System requirements: Windows 8/10/11 (32 and 64 bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 2GB RAM, USB3.0 port, CD-ROM, 17" or larger display
Software: MAGUS View
Mount type: C-mount
Body: CNC aluminum alloy
Power supply: DC current, 5V, with the USB port of the PC
Operating temperature range, °C (°F): –10... 50 (14... 122)
Operating humidity range, %: 30… 80
