MAGUS Bio D230TL
83006
€
1449,95
MAGUS Bio D230TL Biological Digital Microscope
With a camera. Magnification: 40–1000x. Trinocular head, achromatic objectives, 3W LED
The microscope is suitable for observing transparent and translucent biological samples, such as smears and cross sections in transmitted light in a bright field. The installation of additional accessories will allow for darkfield, phase-contrast, and polarization methods. The microscope is suitable for daily laboratory work, research, and teaching.
With a camera. Magnification: 40–1000x. Trinocular head, achromatic objectives, 3W LED
The microscope is suitable for observing transparent and translucent biological samples, such as smears and cross sections in transmitted light in a bright field. The installation of additional accessories will allow for darkfield, phase-contrast, and polarization methods. The microscope is suitable for daily laboratory work, research, and teaching.
Digital camera
The MAGUS CDF10 digital camera is designed for the brightfield and darkfield microscopy technique. It offers a low noise level and high light sensitivity.
The camera is equipped with a 2MP sensor and delivers realistic Full HD images (1920x1080px) when observing with 40x, 60x, and 100x objectives.
Video is recorded at 125fps at maximum resolution: They are smooth with soft and subtle transitions between frames. The movement of the sample is displayed in real time with no delays. The camera makes it easy to work with moving samples and is ideal for classroom demonstrations.
The camera is equipped with the USB3.0 interface. The data transfer speed is 10 times faster than USB 2.0 cameras. The high-speed camera is recommended for professional laboratories, research, or university training.
Monitor
The MAGUS MCD20 Monitor is designed to use a visualization system of the MAGUS microscope.
It is connected to a camera mounted on the microscope to display real-time images. It supports MAGUS full HD resolution HDMI cameras.
The screen diagonal is 13.3 inches. The IPS matrix provides bright images with large viewing angles. If you look at the display at an angle, the color reproduction is not distorted.
The display can be placed on a folding stand on a table or shelf or mounted directly to the camera or microscope stand.
Microscope head
Trinocular head with infinity achromatic objectives. Eyepiece tubes rotate 360°. The user can adjust the eye relief on the eyepiece to fit their height. The digital camera is mounted instead of an eyepiece in the trinocular tube.
Revolving nosepiece
5 objectives. A slot for the installation of an additional lens that increases the range of magnification. The revolving nosepiece with objectives is oriented toward the interior – the user can see the objective inserted into the optical path, and the space above the stage is free.
Focusing mechanism
Coaxial coarse and fine focusing knobs are located at the base of the microscope on both sides. The user can put their hands on the table and take a relaxed pose while observing. The focus adjustment is smooth and easy.
Stage
To ensure ergonomic operation of the stage, it does not have an X-axis positioning rack. The mechanism that has been mounted into the stage moves the object smoothly. The slide holder is attached by way of two screws and can be removed for easy operation.
Abbe condenser
The condenser has a slot for a darkfield slider or a phase contrast slider. The installation of a slider saves time when changing the observation method.
Illumination
The 3W LED illumination provides color consistency when adjusting brightness. The LED has a lifespan of 50,000 hours.
Accessories
There is a line of accessories designed for the microscope: eyepieces, objectives, darkfield, phase-contrast and polarization devices, digital cameras, and calibration slides.
The MAGUS CDF10 digital camera is designed for the brightfield and darkfield microscopy technique. It offers a low noise level and high light sensitivity.
The camera is equipped with a 2MP sensor and delivers realistic Full HD images (1920x1080px) when observing with 40x, 60x, and 100x objectives.
Video is recorded at 125fps at maximum resolution: They are smooth with soft and subtle transitions between frames. The movement of the sample is displayed in real time with no delays. The camera makes it easy to work with moving samples and is ideal for classroom demonstrations.
The camera is equipped with the USB3.0 interface. The data transfer speed is 10 times faster than USB 2.0 cameras. The high-speed camera is recommended for professional laboratories, research, or university training.
Monitor
The MAGUS MCD20 Monitor is designed to use a visualization system of the MAGUS microscope.
It is connected to a camera mounted on the microscope to display real-time images. It supports MAGUS full HD resolution HDMI cameras.
The screen diagonal is 13.3 inches. The IPS matrix provides bright images with large viewing angles. If you look at the display at an angle, the color reproduction is not distorted.
The display can be placed on a folding stand on a table or shelf or mounted directly to the camera or microscope stand.
Microscope head
Trinocular head with infinity achromatic objectives. Eyepiece tubes rotate 360°. The user can adjust the eye relief on the eyepiece to fit their height. The digital camera is mounted instead of an eyepiece in the trinocular tube.
Revolving nosepiece
5 objectives. A slot for the installation of an additional lens that increases the range of magnification. The revolving nosepiece with objectives is oriented toward the interior – the user can see the objective inserted into the optical path, and the space above the stage is free.
Focusing mechanism
Coaxial coarse and fine focusing knobs are located at the base of the microscope on both sides. The user can put their hands on the table and take a relaxed pose while observing. The focus adjustment is smooth and easy.
Stage
To ensure ergonomic operation of the stage, it does not have an X-axis positioning rack. The mechanism that has been mounted into the stage moves the object smoothly. The slide holder is attached by way of two screws and can be removed for easy operation.
Abbe condenser
The condenser has a slot for a darkfield slider or a phase contrast slider. The installation of a slider saves time when changing the observation method.
Illumination
The 3W LED illumination provides color consistency when adjusting brightness. The LED has a lifespan of 50,000 hours.
Accessories
There is a line of accessories designed for the microscope: eyepieces, objectives, darkfield, phase-contrast and polarization devices, digital cameras, and calibration slides.
Key features of the microscope:
Key features of the camera:
- Trinocular head with a trinocular tube to mount a digital camera and an option to adjust an eyepiece
- Illumination: powerful 3W LED illumination for bright natural light
- Ergonomic design for comfortable long-term operation
- Wide range of compatible optional accessories
- Microscope arm (carrying handle)
Key features of the camera:
- For brightfield and darkfield microscopy observations with 40х, 60х, and 100х objectives; it is the most affordable camera for darkfield microscopy with a large pixel sensor.
- The camera resolution is 1920x1080px: It is an ideal choice for displaying images on a Full HD monitor.
- 125fps for observing samples that are moving, recording video, and moving the sample without jerkiness or delays.
- SONY Exmor backlit color CMOS sensor provides low noise level and high light sensitivity even in low-light conditions. You will get clearer, brighter, and more color-saturated images.
- USB3.0 interface for fast, smooth data transfer
- Software with photo, video recording, editing, external display, linear and angular measurements
- MAGUS CDF10 Digital Сamera (digital camera, USB cable, installation CD with drivers and software, user manual and warranty card)
- Base with a power input, transmitted light source, focusing mechanism, stage, condenser mount, and revolving nosepiece
- Abbe condenser
- Trinocular head
- Infinity achromatic objective: 4x/0.10
- Infinity achromatic objective: 10x/0.25
- Infinity achromatic objective: 40x/0.65 (spring-loaded)
- Infinity achromatic objective: 100x/1.25 oil (spring-loaded)
- Eyepiece 10x/18mm with a long eye relief (2 pcs.)
- Eyecup (2 pcs.)
- Filter (4 pcs.)
- C-mount camera adapter
- Bottle of the immersion oil
- AC power cord
- Dust cover
- User manual and warranty card
Available on request:
- MAGUS E10S 10х/20mm Eyepiece with scale (D 23.2mm)
- MAGUS E15 15х/11mm Eyepiece (D 23.2mm)
- MAGUS E16 16х/11mm Eyepiece (D 23.2mm)
- MAGUS E20 20х/11mm Eyepiece (D 23.2mm)
- MAGUS MA20 20х/0.40 ∞/0.17 Infinity Achromatic Objective
- MAGUS MP20 20х/0.40 ∞/0.17 Infinity Plan Achromatic Objective
- MAGUS MP60 60х/0.80 ∞/0.17 Infinity Plan Achromatic Objective
- Phase contrast device
- Phase contrast slider
- MAGUS DF1 A 0.9 Darkfield Condenser
- MAGUS DF2 A 1.36–1.25 Oil Darkfield Condenser
- MAGUS DFS1 Darkfield Slider
- MAGUS SPD1 Polarizer/Analyzer Set
- LCD Monitor
- Calibration slide
- MAGUS CFA050 C-mount Adapter
- MAGUS CFA065 C-mount Adapter
Microscope design: straight-tube
Image field: flat-field
Transmitted light microscopy techniques: brightfield, darkfield (optional), luminescence (optional), polarized light (optional), phase contrast (optional)
Microscope magnification, x: 40–1000 basic configuration (*optional: 40–1500/1600/2000)
Tube length: infinity (∞)
Microscope head type: trinocular
Microscope head: Gemel head (Siedentopf, 360° rotation)
Inclination: 30°
Microscope head magnification, x: 1
Interpupillary distance, mm: 48–75
Eyepiece diameter, mm: 23.2
Diopter adjustment, diopters: ±5 (left barrel)
Eyepieces, x/field, mm: 10х/18mm, eye relief: 10mm (*optional: 10х/20mm with a scale, 15x/11mm, 16x/11mm; 20x/11mm)
Revolving nosepiece: 5 objectives
Optical design: infinity achromatic objectives (∞), parfocal distance: 45mm
Objectives, x/aperture/working distance, mm: 4x/0.10/18.89; 10x/0.25/5.95; 40x/0.65/0.775; 100x/1.25 oil/0.36; (*optional: 20х/0.40/2.61; 20х/0.40/8.80; 60x/0.80/0.46)
Spring-loaded retractable assembly: 40x, 60x, 100x
Stage: double layer mechanical stage, stage size: 180mm×150mm, without a positioning rack
Moving range, mm: 75/50
Condenser: Abbe condenser, N.A. 1.25, center-adjustable, height-adjustable, adjustable diaphragm, a slot for a darkfield slider and phase-contrast slider, dovetail mount
Diaphragm: adjustable iris diaphragm
Focusing mechanism: coaxial coarse and fine focusing knobs located on both sides
Coarse focusing travel, mm: 21
Coarse focusing travel, mm/circle: 39.8
Fine focusing scale value, μm: 2
Coarse focusing tension adjusting knob: +
Coarse focusing lock knob: +
Illumination: transmitted
Transmitted light source: 3W LED
Phase-contrast device: *optional: phase-contrast turret condenser, phase-contrast objective (10x, 20x, 40x, 100x), centering telescope
Darkfield condenser: *optional: dry darkfield condenser (for dry objectives), oil darkfield condenser (for 100x oil objectives)
Polarization device: *optional: polarizer placed on the collector; analyzer inserted in the slot above the revolving nosepiece
Power supply, V/Hz: AC power supply, 220±22/50
Operating temperature range, °C (°F): 5… 35 (41… 95)
Operating humidity range, %: 20… 80
Dimensions without packaging (W×H×L), mm max.: 200x436x400
Net weight, kg max.: 8
Image field: flat-field
Transmitted light microscopy techniques: brightfield, darkfield (optional), luminescence (optional), polarized light (optional), phase contrast (optional)
Microscope magnification, x: 40–1000 basic configuration (*optional: 40–1500/1600/2000)
Tube length: infinity (∞)
Microscope head type: trinocular
Microscope head: Gemel head (Siedentopf, 360° rotation)
Inclination: 30°
Microscope head magnification, x: 1
Interpupillary distance, mm: 48–75
Eyepiece diameter, mm: 23.2
Diopter adjustment, diopters: ±5 (left barrel)
Eyepieces, x/field, mm: 10х/18mm, eye relief: 10mm (*optional: 10х/20mm with a scale, 15x/11mm, 16x/11mm; 20x/11mm)
Revolving nosepiece: 5 objectives
Optical design: infinity achromatic objectives (∞), parfocal distance: 45mm
Objectives, x/aperture/working distance, mm: 4x/0.10/18.89; 10x/0.25/5.95; 40x/0.65/0.775; 100x/1.25 oil/0.36; (*optional: 20х/0.40/2.61; 20х/0.40/8.80; 60x/0.80/0.46)
Spring-loaded retractable assembly: 40x, 60x, 100x
Stage: double layer mechanical stage, stage size: 180mm×150mm, without a positioning rack
Moving range, mm: 75/50
Condenser: Abbe condenser, N.A. 1.25, center-adjustable, height-adjustable, adjustable diaphragm, a slot for a darkfield slider and phase-contrast slider, dovetail mount
Diaphragm: adjustable iris diaphragm
Focusing mechanism: coaxial coarse and fine focusing knobs located on both sides
Coarse focusing travel, mm: 21
Coarse focusing travel, mm/circle: 39.8
Fine focusing scale value, μm: 2
Coarse focusing tension adjusting knob: +
Coarse focusing lock knob: +
Illumination: transmitted
Transmitted light source: 3W LED
Phase-contrast device: *optional: phase-contrast turret condenser, phase-contrast objective (10x, 20x, 40x, 100x), centering telescope
Darkfield condenser: *optional: dry darkfield condenser (for dry objectives), oil darkfield condenser (for 100x oil objectives)
Polarization device: *optional: polarizer placed on the collector; analyzer inserted in the slot above the revolving nosepiece
Power supply, V/Hz: AC power supply, 220±22/50
Operating temperature range, °C (°F): 5… 35 (41… 95)
Operating humidity range, %: 20… 80
Dimensions without packaging (W×H×L), mm max.: 200x436x400
Net weight, kg max.: 8
Sensor: SONY Exmor CMOS
Color/monochrome: color
Megapixels: 2
Maximum resolution, pix: 1920x1080
Sensor size: 1/2" (7.2x4.05mm)
Pixel size, μm: 3.75x3.75
Light sensitivity: 2350mV at 1/30s
Signal/noise ratio: 0.15mV at 1/30s
Exposure, ms: 0.1ms–15s
Video recording: +
Frame rate, fps at resolution: 125@1920x1080
Place of installation: trinocular tube, eyepiece tube instead of eyepiece
Image format: *.jpg, *.bmp, *.png, *.tif
Video format: *.wmv, *.avi, *.h264 (Win 8 or newer), *h265 (Win 10 or newer)
Spectral range, nm: 380–650 (with IR filter)
Shutter type: ERS (electronic rolling shutter)
White balance: auto/manual
Exposure control: auto/manual
Software features: image size, brightness, exposure time
Output: USB 3.0, 5Gb/s
System requirements: Windows 8/10/11 (32 and 64 bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 2GB RAM, USB3.0 port, CD-ROM, 17" or larger display
Software: MAGUS View
Mount type: C-mount
Body: solid aluminum
Power supply: DC current, 5 V, with the USB port of the PC
Operating temperature range, °C (°F): −10... 50 (14… 122)
Operating humidity range, %: 30… 80
Color/monochrome: color
Megapixels: 2
Maximum resolution, pix: 1920x1080
Sensor size: 1/2" (7.2x4.05mm)
Pixel size, μm: 3.75x3.75
Light sensitivity: 2350mV at 1/30s
Signal/noise ratio: 0.15mV at 1/30s
Exposure, ms: 0.1ms–15s
Video recording: +
Frame rate, fps at resolution: 125@1920x1080
Place of installation: trinocular tube, eyepiece tube instead of eyepiece
Image format: *.jpg, *.bmp, *.png, *.tif
Video format: *.wmv, *.avi, *.h264 (Win 8 or newer), *h265 (Win 10 or newer)
Spectral range, nm: 380–650 (with IR filter)
Shutter type: ERS (electronic rolling shutter)
White balance: auto/manual
Exposure control: auto/manual
Software features: image size, brightness, exposure time
Output: USB 3.0, 5Gb/s
System requirements: Windows 8/10/11 (32 and 64 bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 2GB RAM, USB3.0 port, CD-ROM, 17" or larger display
Software: MAGUS View
Mount type: C-mount
Body: solid aluminum
Power supply: DC current, 5 V, with the USB port of the PC
Operating temperature range, °C (°F): −10... 50 (14… 122)
Operating humidity range, %: 30… 80
