MAGUS CBF30 Digital Camera

83204
649,95
USB 3.0, 6.3MP, 1/1.8'', color

The MAGUS CBF30 digital camera is designed for the brightfield microscopy technique.
The camera is equipped with a 6.3MP sensor and produces realistic images at a resolution of 3072x2048pix. The camera is recommended for use with 4x, 10x, 20x, and 40x objectives. When working with low magnification objectives, the camera will enable you to see more fine details.
Video is recorded at 59fps at maximum resolution. Videos are smooth, with soft and subtle transitions between frames. The movement of the sample is displayed in real time with no delays. The camera makes it easy to work with samples that are moving and is suitable for classroom demonstrations. The resolution can be reduced to 1536x1024pix, if required.
The camera is equipped with a USB 3.0 interface. The data transfer speed is 10 times faster than USB 2.0 cameras. The high-speed camera is recommended for professional laboratories, research, or university training.
Description
Key features
Package
Specifications
References and downloads

Description

Sensor
The camera is equipped with a SONY Exmor backlit color CMOS sensor. This technology increases light sensitivity and improves camera performance in low-light conditions.
The 1/1.8" sensor with 2.4x2.4µm pixels provides light sensitivity of 425mV at 1/30 s. To achieve the maximum field of view without distortion, we recommend using an adapter with a magnification of 0.5x to 0.75x.

Software features
The camera uses software to display images on an external display, take photographs, record video, edit images, and measure linear and angular dimensions of objects and their structures. Before taking measurements, the software must be calibrated for each objective with a calibration slide.

Installation
The camera is mounted on the microscope in the trinocular tube/camera port using the C-mount adapter (included). To mount the camera in an eyepiece tube instead of an eyepiece, you will need a special C-mount adapter and adapters to fit the tube diameter (not included).

Key features

  • For brightfield microscopy 4x, 10x, 20x, and 40x objectives
  • 6.3MP resolution: when working with low magnification objectives, the camera will allow you to see more fine details
  • 59fps for observing samples that are moving, recording video, and moving the preparation without jerkiness or delays
  • SONY Exmor backlit color CMOS sensor provides low noise level and high light sensitivity even in low light conditions. You will get clearer, brighter, and more color-saturated images
  • USB 3.0 interface for fast, smooth data transfer
  • Software with photo, video recording, editing, external display, and linear and angular measurement

Package

  • Digital camera
  • USB cable
  • Installation CD with drivers and software
  • User manual and warranty card

Specifications

Sensor: SONY Exmor CMOS

Color/monochrome: color

Megapixels: 6.3

Maximum resolution, pix: 3072x2048

Sensor size: 1/1.8" (7.37x4.92mm)

Pixel size, μm: 2.4x2.4

Light sensitivity: 425mV at 1/30s

Signal/noise ratio: 0.15mV at 1/30s

Exposure: 0.02ms–15s

Video recording: +

Frame rate, fps at resolution: 59@3072x2048; 59@1536x1024

Place of installation: trinocular tube, eyepiece tube instead of eyepiece

Image format: *.jpg, *.bmp, *.png, *.tif

Video format: recording: *.wmv, *.avi, *.h264 (Win 8 or newer), *h265 (Win 10 or newer)

Spectral range, nm: 380–650 (with IR filter)

Shutter type: ERS (electronic rolling shutter)

White balance: auto/manual

Exposure control: auto/manual

Software features: image size, brightness, exposure time

Output: USB 3.0, 5Gb/s

System requirements: Windows 8/10/11 (32 and 64 bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 2GB RAM, USB3.0 port, CD-ROM, 17" or larger display

Software: MAGUS View

Mount type: C-mount

Body: solid aluminum

Power supply: DC current, 5V, from the USB port of the PC

Operating temperature range, °C: –10... 50

Operating humidity range, %: 30… 80