MAGUS Bio D290T
83287
€
8459,95
With a camera. Magnification: 40–1000x. Trinocular head with adjustable tilt, motorized revolving nosepiece and condenser, plan achromatic objectives, 3W LED illuminator, and intelligent lighting control system
The research-grade microscope. The microscope is designed for observing transparent and translucent biological specimens, such as smears and sections, in transmitted light using the brightfield technique. Installation of additional accessories will allow for darkfield, phase contrast, differential interference contrast, fluorescence, and polarization techniques.
The motorized revolving nosepiece and condenser automate the process of switching objectives and adjusting the lighting system for each of them. The user is not distracted by the settings and therefore focused on the research, which accelerates the speed of operations.
The microscope is equipped with a 5MP camera with a USB 3.0 interface. The camera connects to a computer and displays the image on its screen. The software complements the system with analysis and documentation functions.
The microscope is suitable for microbiological analysis, medical diagnostics, scientific and research tasks.
The research-grade microscope. The microscope is designed for observing transparent and translucent biological specimens, such as smears and sections, in transmitted light using the brightfield technique. Installation of additional accessories will allow for darkfield, phase contrast, differential interference contrast, fluorescence, and polarization techniques.
The motorized revolving nosepiece and condenser automate the process of switching objectives and adjusting the lighting system for each of them. The user is not distracted by the settings and therefore focused on the research, which accelerates the speed of operations.
The microscope is equipped with a 5MP camera with a USB 3.0 interface. The camera connects to a computer and displays the image on its screen. The software complements the system with analysis and documentation functions.
The microscope is suitable for microbiological analysis, medical diagnostics, scientific and research tasks.
###<iframe width="610" height="340" src="https://www.youtube.com/embed/7cFZTsj4VPY?si=C3IpLDd8MfkM6Yfe" frameBorder="0" allow="clipboard-write; autoplay" webkitAllowFullScreen mozallowfullscreen allowFullScreen></iframe>###
Digital camera
MAGUS CBF90 is a science camera with 5MP resolution and a 2/3" sensor for the brightfield microscopy technique.
The camera produces a realistic image in 2448x2048px. When observing with low and medium magnification objectives, the camera will show more fine details.
Video is recorded at 35fps or 50fps depending on its resolution. Videos are smooth, with soft and subtle transitions between frames. The movement of the sample is displayed in real time with no delays. The camera provides convenient work with moving objects and is suitable for conducting demonstrations in a classroom.
The camera is equipped with a USB 3.0 interface. The data transfer rate is 10 times faster than that of USB 2.0 cameras. The high-speed camera is recommended for professional laboratories, research, or university training.
Microscope head
Trinocular head with infinity-corrected optics. The user selects the most comfortable angle of inclination of the microscope head in the range of 0° to 35°. The digital camera is mounted on the vertical tube. The beam splits 0/100, 100/0, or 80/20.
The basic configuration includes 10x/25mm eyepieces with diopter adjustment and eye relief to work with glasses.
Revolving nosepiece and objectives
A motorized revolving nosepiece for 6 objectives is oriented toward the interior: The user sees the objective inserted into the optical path, and the space above the stage is free. An additional objective can also be installed in the free slot in order to achieve extra magnification. The objectives are plan achromatic with a parfocal distance of 60mm.
Above the nosepiece is a slot with a plug for installing an analyzer, compensators, or differential interference contrast sliders.
Remote control of the revolving nosepiece
The front panel of the microscope has objective selection buttons. When you press a button, the revolving nosepiece automatically sets the selected objective to its operating position. A separate button is used to switch between the two most commonly used objectives.
On both sides of the body, next to the focusing knobs, there are buttons for rotating the nosepiece.
The lighting and condenser position are automatically adjusted to match the selected objective.
These features improve user comfort, speed, and efficiency.
Maintaining comfortable brightness levels when switching magnifications
The objectives of different magnifications transmit light with different levels of intensity, and so each time you change objectives, the brightness of the light must be adjusted. Switching from a higher to a lower magnification objective causes eye fatigue, as the image brightness in the eyepieces increases sharply. The MAGUS Bio D290T, which is equipped with intelligent brightness control, solves this problem. The microscope remembers the brightness for each objective that the user has selected and automatically sets this brightness when turning the nosepiece. Intelligent control reduces the time required to adjust brightness. MAGUS Bio D290T increases user comfort and saves time even when work requires frequent magnification changes.
Focusing mechanism
The microscope features low-position coaxial coarse and fine focusing knobs. The researcher can place their hands on the table and take a comfortable position in front of the microscope.
The coarse focus lock knob helps you quickly adjust the microscope after changing the object of study. The knob is located on the left side of the microscope on the same axis as the focusing mechanism.
The ring on the right side adjusts the tension of the coarse focusing travel. The user adjusts the comfortable tension for work.
Stage
The stage plate is made of sapphire glass. The hardness, durability as well as scratch and chemical resistance of the sapphire glass is second only to diamond glass. It significantly outperforms the popular chemically tempered Gorilla Glass. According to the Mohs scale (a ten-point scale of relative hardness of mineral surfaces), Gorilla Glass scores 6.8, sapphire scores 9, and diamond has a score of 10.
The specimen holder is secured with two screws and can be easily removed during manual scanning.
The height-adjustable stage control knob ensures user comfort, allowing the user’s hand to rest on the desk for fatigue-free operation. The control knob also features tension adjustment, which allows you to select the optimal rotation tension for smooth and precise specimen movement.
Condenser
Optimal condenser settings for each objective: The flip-down lens automatically moves out of the beam path for low-magnification objectives and returns back for objectives with magnifications greater than 10x. One less manual step – for fast and convenient operation. The user can also individually adjust the position of the swivel auxiliary condenser lens for specific studies.
The condenser is height-adjustable and can be centered. Mounting type: dovetail.
The condenser ring adjusts the iris aperture diaphragm. The condenser body has white aperture markings and color markings for the objective magnification, and the ring has an indicator marker. To achieve the contrast on each objective, it is recommended to rotate the ring so that the indicator marker matches the aperture or magnification marking of the objective being used.
Light source
The transmitted light illuminator uses a 3W LED. The color temperature does not change when you adjust the brightness. The LED lifetime is 50,000 hours.
Köhler illumination in transmitted light
The light source is located at the rear of the microscope, and the light is directed to the collector using a mirror.
The image contrast is controlled by the condenser aperture diaphragm, while the illuminated field area is adjusted by the field diaphragm. The field aperture control is located on the right at the bottom of the body, next to the focus adjustment area. This simplifies the Köhler illumination setup.
The Köhler illumination improves the image quality of the observed sample: Each objective achieves maximum resolution and the field of view is illuminated evenly without darkening at the edges. The object of study is in sharp focus and the image artifacts are removed.
Ergonomic design
Physical discomfort causes fatigue and reduces productivity. The ergonomic design of the microscope plays an important role in everyday scientific research.
MAGUS Bio D290T provides user comfort during work.
Motorized components increase speed and simplify repetitive tasks when changing objectives frequently.
The adjustable head allows the user to select a comfortable viewing angle for reducing neck and back strain.
Focusing knobs are located at the bottom of the body. The user does not need to strain their hands. Thanks to the smooth movement of the mechanism, the user can effortlessly focus on the object.
The microscope is operated with minimal hand movement, since the long stage control handle and fine focusing knob are located in the same working area.
Accessories
There is a line of accessories designed specifically for this microscope.
Optional objectives provide additional magnification.
Eyepieces extend the magnification range of the microscope. Optional eyepieces help you maximize the potential of the objective that you use most often.
Optional attachments for phase contrast, epi-fluorescence, darkfield, polarization, and DIC expand the range of microscopy techniques, allowing you to study specimens that are invisible in brightfield.
A calibration slide is used to measure objects and can be combined with the eyepiece with a scale or with the camera software.
Alternative models
The MAGUS Bio D290T is an alternative for the following models: Carl Zeiss Axiscope 5, Leica DM 2500, Leica DM 2500LED, Leica DM 3000, Leica DM 3000LED, Nikon ECLIPSE Ci, Nikon ECLIPSE Ni, Nikon ECLIPSE Si, Olympus BX 53, Olympus BX43 BX53 Fluo Evident.
MAGUS CBF90 is a science camera with 5MP resolution and a 2/3" sensor for the brightfield microscopy technique.
The camera produces a realistic image in 2448x2048px. When observing with low and medium magnification objectives, the camera will show more fine details.
Video is recorded at 35fps or 50fps depending on its resolution. Videos are smooth, with soft and subtle transitions between frames. The movement of the sample is displayed in real time with no delays. The camera provides convenient work with moving objects and is suitable for conducting demonstrations in a classroom.
The camera is equipped with a USB 3.0 interface. The data transfer rate is 10 times faster than that of USB 2.0 cameras. The high-speed camera is recommended for professional laboratories, research, or university training.
Microscope head
Trinocular head with infinity-corrected optics. The user selects the most comfortable angle of inclination of the microscope head in the range of 0° to 35°. The digital camera is mounted on the vertical tube. The beam splits 0/100, 100/0, or 80/20.
The basic configuration includes 10x/25mm eyepieces with diopter adjustment and eye relief to work with glasses.
Revolving nosepiece and objectives
A motorized revolving nosepiece for 6 objectives is oriented toward the interior: The user sees the objective inserted into the optical path, and the space above the stage is free. An additional objective can also be installed in the free slot in order to achieve extra magnification. The objectives are plan achromatic with a parfocal distance of 60mm.
Above the nosepiece is a slot with a plug for installing an analyzer, compensators, or differential interference contrast sliders.
Remote control of the revolving nosepiece
The front panel of the microscope has objective selection buttons. When you press a button, the revolving nosepiece automatically sets the selected objective to its operating position. A separate button is used to switch between the two most commonly used objectives.
On both sides of the body, next to the focusing knobs, there are buttons for rotating the nosepiece.
The lighting and condenser position are automatically adjusted to match the selected objective.
These features improve user comfort, speed, and efficiency.
Maintaining comfortable brightness levels when switching magnifications
The objectives of different magnifications transmit light with different levels of intensity, and so each time you change objectives, the brightness of the light must be adjusted. Switching from a higher to a lower magnification objective causes eye fatigue, as the image brightness in the eyepieces increases sharply. The MAGUS Bio D290T, which is equipped with intelligent brightness control, solves this problem. The microscope remembers the brightness for each objective that the user has selected and automatically sets this brightness when turning the nosepiece. Intelligent control reduces the time required to adjust brightness. MAGUS Bio D290T increases user comfort and saves time even when work requires frequent magnification changes.
Focusing mechanism
The microscope features low-position coaxial coarse and fine focusing knobs. The researcher can place their hands on the table and take a comfortable position in front of the microscope.
The coarse focus lock knob helps you quickly adjust the microscope after changing the object of study. The knob is located on the left side of the microscope on the same axis as the focusing mechanism.
The ring on the right side adjusts the tension of the coarse focusing travel. The user adjusts the comfortable tension for work.
Stage
The stage plate is made of sapphire glass. The hardness, durability as well as scratch and chemical resistance of the sapphire glass is second only to diamond glass. It significantly outperforms the popular chemically tempered Gorilla Glass. According to the Mohs scale (a ten-point scale of relative hardness of mineral surfaces), Gorilla Glass scores 6.8, sapphire scores 9, and diamond has a score of 10.
The specimen holder is secured with two screws and can be easily removed during manual scanning.
The height-adjustable stage control knob ensures user comfort, allowing the user’s hand to rest on the desk for fatigue-free operation. The control knob also features tension adjustment, which allows you to select the optimal rotation tension for smooth and precise specimen movement.
Condenser
Optimal condenser settings for each objective: The flip-down lens automatically moves out of the beam path for low-magnification objectives and returns back for objectives with magnifications greater than 10x. One less manual step – for fast and convenient operation. The user can also individually adjust the position of the swivel auxiliary condenser lens for specific studies.
The condenser is height-adjustable and can be centered. Mounting type: dovetail.
The condenser ring adjusts the iris aperture diaphragm. The condenser body has white aperture markings and color markings for the objective magnification, and the ring has an indicator marker. To achieve the contrast on each objective, it is recommended to rotate the ring so that the indicator marker matches the aperture or magnification marking of the objective being used.
Light source
The transmitted light illuminator uses a 3W LED. The color temperature does not change when you adjust the brightness. The LED lifetime is 50,000 hours.
Köhler illumination in transmitted light
The light source is located at the rear of the microscope, and the light is directed to the collector using a mirror.
The image contrast is controlled by the condenser aperture diaphragm, while the illuminated field area is adjusted by the field diaphragm. The field aperture control is located on the right at the bottom of the body, next to the focus adjustment area. This simplifies the Köhler illumination setup.
The Köhler illumination improves the image quality of the observed sample: Each objective achieves maximum resolution and the field of view is illuminated evenly without darkening at the edges. The object of study is in sharp focus and the image artifacts are removed.
Ergonomic design
Physical discomfort causes fatigue and reduces productivity. The ergonomic design of the microscope plays an important role in everyday scientific research.
MAGUS Bio D290T provides user comfort during work.
Motorized components increase speed and simplify repetitive tasks when changing objectives frequently.
The adjustable head allows the user to select a comfortable viewing angle for reducing neck and back strain.
Focusing knobs are located at the bottom of the body. The user does not need to strain their hands. Thanks to the smooth movement of the mechanism, the user can effortlessly focus on the object.
The microscope is operated with minimal hand movement, since the long stage control handle and fine focusing knob are located in the same working area.
Accessories
There is a line of accessories designed specifically for this microscope.
Optional objectives provide additional magnification.
Eyepieces extend the magnification range of the microscope. Optional eyepieces help you maximize the potential of the objective that you use most often.
Optional attachments for phase contrast, epi-fluorescence, darkfield, polarization, and DIC expand the range of microscopy techniques, allowing you to study specimens that are invisible in brightfield.
A calibration slide is used to measure objects and can be combined with the eyepiece with a scale or with the camera software.
Alternative models
The MAGUS Bio D290T is an alternative for the following models: Carl Zeiss Axiscope 5, Leica DM 2500, Leica DM 2500LED, Leica DM 3000, Leica DM 3000LED, Nikon ECLIPSE Ci, Nikon ECLIPSE Ni, Nikon ECLIPSE Si, Olympus BX 53, Olympus BX43 BX53 Fluo Evident.
- Observations of transparent and translucent samples in brightfield in transmitted light
- Ergonomic trinocular head with an adjustable tilt angle and a vertical camera port; beam splitting ratio (eyepiece/camera): 100:0, 0:100, or 20:80
- Motorized revolving nosepiece controlled by ergonomic buttons on the lower stand for one-touch objective switching
- Transmitted light illuminator is energy-saving 3W LED with a lifetime of up to 50,000 hours
- Köhler illumination in transmitted light and the motorized condenser with a flip-down lens
- Intelligent lighting control system – automatic brightness selection when changing the working objective
- The stage has a sapphire glass plate and a long control handle for comfort during use
- Wide range of compatible optional accessories
Camera features:
- Science camera for brightfield observations with 20x, 40x, 60x and 100x objectives
- Large sensor size – 2/3'': better image quality, less noise level, more light sensitivity
- 5MP resolution: when observing with medium magnification objectives, the camera will show more fine details
- 35fps or 50fps depending on the resolution for observing moving samples, recording video, and moving the preparation without jerks or lags
- SONY Exmor backlit color CMOS sensor delivers low noise performance and high light sensitivity even in low light conditions: clearer, brighter, and more color-saturated images
- USB 3.0 interface for fast data transfer with no jerking or lagging
- Software with photo, video recording, editing, external display, linear and angular measurements
- MAGUS CBF90 digital camera (digital camera, USB cable, USB flash drive with drivers and software, user manual, and warranty card)
- Stand with built-in power supply, focusing mechanism, stage, condenser mount, and a motorized revolving nosepiece
- Transmitted light illuminator with a lamphouse
- Motorized condenser with a flip-down lens
- Trinocular microscope head
- Plan achromatic objective Plan 4x/0.10 ∞/0.17, parfocal distance: 60mm
- Plan achromatic objective Plan 10x/0.25 ∞/0.17, parfocal distance: 60mm
- Plan achromatic objective Plan 20х/0.40 ∞/0.17, parfocal distance: 60mm
- Plan achromatic objective Plan 40x/0.65 ∞/0.17 (spring-loaded), parfocal distance: 60mm
- Plan achromatic objective Plan 100x/1.25 oil ∞/0.17 (spring-loaded), parfocal distance: 60mm
- 10х/25mm eyepiece with long eye relief and diopter adjustment (2 pcs.)
- Eyecup (2 pcs.)
- 1х C-mount adapter
- Microscope power cord
- Dust cover
- User manual and warranty card
Available on request:
- Plan achromatic objective Plan 2х/0.06 ∞/–, parfocal distance: 60mm
- Plan achromatic objective Plan 60х/0.80 ∞/0.17, parfocal distance: 60mm
- Plan apochromatic objective Plan Apo 60х/1.42 oil ∞/0.17, parfocal distance: 60mm
- Plan achromatic objective Plan 100х/1.10 ∞/0.17 water, parfocal distance: 60mm
- Set of plan semi-apochromatic fluorescence objectives Plan S-Apo 4x, 10x, 20x, 40x, 100x (oil) ∞/0.17, parfocal distance: 60mm
- 10х/22mm eyepiece with a scale
- 10x/22mm eyepiece with a reticle
- 10x/22mm eyepiece with crosshairs
- 12.5х/16mm eyepiece (2 pcs.)
- 15х/16mm eyepiece (2 pcs.)
- 20х/12mm eyepiece (2 pcs.)
- 30х/8mm eyepiece (2 pcs.)
- Phase contrast device: phase contrast condenser, set of phase objectives, centering telescope
- Darkfield condenser NA 0.7–0.9
- Darkfield immersion condenser NA 1.3–1.26
- Differential Interference Contrast (DIC) device
- Epi-fluorescence attachment featuring a mercury lamphouse, fluorescence filter cubes, and a mercury lamp power supply unit
- Epi-fluorescence attachment with LED light source, fluorescence filter cubes, and power cable
- Polarizer/analyzer set
- Calibration slide
- Monitor
- Set of color filters (blue, green, yellow, frosted glass)
Microscope design: upright
Image field: flat
Transmitted light microscopy techniques: brightfield, darkfield (optional), fluorescence (optional), polarized light (optional), phase contrast (optional), differential interference contrast (optional)
Microscope magnification, x: 40–1000 basic configuration (*optional: 40–1250/1500/2000)
Tube length: infinity (∞)
Microscope head: trinocular
C-mount adapter magnification, x: 1
Beam splitting ratio (eyepieces/trinocular tube): 0/100, 100/0, 80/20
Inclination: 0–35°, adjustable
Microscope head magnification, x: 1
Interpupillary distance, mm: 47–78
Eyepiece diameter, mm: 30
Eyepieces, x/field, mm: 10x/25 with diopter adjustment ±5 dp, eye relief (*optional: 10x/22 with scale, 10x/22 with reticle, 10x/22 with crosshairs, 12.5x/16, 15x/16, 20x/12, 30x/8)
Revolving nosepiece: 6 objectives, motorized
Optical design: Infinity plan achromatic objectives (∞), parfocal distance: 60 mm
Objectives, x/aperture/working distance, mm: 4x/0.10/30; 10x/0.25/10.2; 20x/0.40/6.4; 40x/0.65/0.7; 100x/1.25 (oil)/0.2 (*optional: 2x/0.06; 60x/0.80; 100x/1.10 (water); Plan Apo 60x/1.42 (oil); set of plan semi-apochromatic fluorescence objectives 4x/10x/20x/40x/100x (oil))
Spring-loaded retractable assembly: 40x, 60x, 100x
Stage: 190×152 mm, two-axis mechanical stage with sapphire glass plate
Moving range, mm: 78/32
Condenser: motorized condenser NA 0.9/0.25 with flip-down front lens; centerable and height-adjustable, adjustable aperture diaphragm; dovetail mount
Field diaphragm: adjustable iris
Focusing mechanism: coaxial coarse and fine focusing knobs on both sides
Coarse focusing travel, mm: 35
Coarse focusing travel, mm/circle: 18.85
Fine focusing travel, mm/circle: 0.1
Fine focusing scale value, μm: 1
Coarse focusing tension adjusting knob: +
Coarse focusing lock knob: +
Illumination method: transmitted light
Transmitted light source: 3 W LED
Intelligent lighting control system: automatic brightness adjustment during objective change
Phase contrast technique: *optional: phase contrast turret condenser; phase contrast objective (10x, 20x, 40x, 100x); centering telescope
Darkfield condenser: *optional: dry darkfield condenser NA 0.7–0.9 (for dry objectives); oil darkfield condenser NA 1.3–1.26 (for 100x immersion objective)
Differential Interference Contrast (DIC) device: *optional
Fluorescence technique: *optional: epi-fluorescence attachment with LED light source; epi-fluorescence attachment with mercury lamphouse
Polarizer/analyzer set: *optional: polarizer mounted on the collector; analyzer in the slot of the stand above the revolving nosepiece
Power supply, V/Hz: AC power supply, 100–240 / 50/60
Operating temperature range, °C: 5–40
Operating humidity range, %: 0–80 (up to 31 °C)
Image field: flat
Transmitted light microscopy techniques: brightfield, darkfield (optional), fluorescence (optional), polarized light (optional), phase contrast (optional), differential interference contrast (optional)
Microscope magnification, x: 40–1000 basic configuration (*optional: 40–1250/1500/2000)
Tube length: infinity (∞)
Microscope head: trinocular
C-mount adapter magnification, x: 1
Beam splitting ratio (eyepieces/trinocular tube): 0/100, 100/0, 80/20
Inclination: 0–35°, adjustable
Microscope head magnification, x: 1
Interpupillary distance, mm: 47–78
Eyepiece diameter, mm: 30
Eyepieces, x/field, mm: 10x/25 with diopter adjustment ±5 dp, eye relief (*optional: 10x/22 with scale, 10x/22 with reticle, 10x/22 with crosshairs, 12.5x/16, 15x/16, 20x/12, 30x/8)
Revolving nosepiece: 6 objectives, motorized
Optical design: Infinity plan achromatic objectives (∞), parfocal distance: 60 mm
Objectives, x/aperture/working distance, mm: 4x/0.10/30; 10x/0.25/10.2; 20x/0.40/6.4; 40x/0.65/0.7; 100x/1.25 (oil)/0.2 (*optional: 2x/0.06; 60x/0.80; 100x/1.10 (water); Plan Apo 60x/1.42 (oil); set of plan semi-apochromatic fluorescence objectives 4x/10x/20x/40x/100x (oil))
Spring-loaded retractable assembly: 40x, 60x, 100x
Stage: 190×152 mm, two-axis mechanical stage with sapphire glass plate
Moving range, mm: 78/32
Condenser: motorized condenser NA 0.9/0.25 with flip-down front lens; centerable and height-adjustable, adjustable aperture diaphragm; dovetail mount
Field diaphragm: adjustable iris
Focusing mechanism: coaxial coarse and fine focusing knobs on both sides
Coarse focusing travel, mm: 35
Coarse focusing travel, mm/circle: 18.85
Fine focusing travel, mm/circle: 0.1
Fine focusing scale value, μm: 1
Coarse focusing tension adjusting knob: +
Coarse focusing lock knob: +
Illumination method: transmitted light
Transmitted light source: 3 W LED
Intelligent lighting control system: automatic brightness adjustment during objective change
Phase contrast technique: *optional: phase contrast turret condenser; phase contrast objective (10x, 20x, 40x, 100x); centering telescope
Darkfield condenser: *optional: dry darkfield condenser NA 0.7–0.9 (for dry objectives); oil darkfield condenser NA 1.3–1.26 (for 100x immersion objective)
Differential Interference Contrast (DIC) device: *optional
Fluorescence technique: *optional: epi-fluorescence attachment with LED light source; epi-fluorescence attachment with mercury lamphouse
Polarizer/analyzer set: *optional: polarizer mounted on the collector; analyzer in the slot of the stand above the revolving nosepiece
Power supply, V/Hz: AC power supply, 100–240 / 50/60
Operating temperature range, °C: 5–40
Operating humidity range, %: 0–80 (up to 31 °C)
Sensor: SONY Exmor CMOS
Color/monochrome: color
Number of megapixels: 5
Maximum resolution, px: 2448x2048
Sensor size: 2/3" (8.45x7.07 mm)
Pixel size, µm: 3.45x3.45
Light sensitivity: 1146 mV with 1/30 s
Signal/noise ratio: 0.15 mV with 1/30 s
Exposure: 0.1 ms–15 s
Video recording: +
Frame rate, fps at resolution, px: 35@2448x2048; 50@1224x1024
Mounting location: trinocular tube, eyepiece tube (in place of the regular eyepiece)
Image format: *.jpg, *.bmp, *.png, *.tif
Video format: *.wmv, *.avi, *.h264 (Windows 8 or later), *.h265 (Windows 10 or later)
Spectral range, nm: 380–650 (IR-filtered)
Shutter type: ERS (electronic rolling shutter)
White balance: auto/manual
Exposure control: auto/manual
Software features: image size, brightness, exposure
Port: USB 3.0, 5 Gbps
System requirements: Windows 8/10/11 (32-bit and 64-bit), Mac OS X, Linux, Intel Core 2 up to 2.8 GHz or higher, minimum 2 GB RAM, USB 3.0 port, 17" or larger display
Software: MAGUS View
Mount type: C-mount
Body: cast aluminum
Power supply: DC 5 V from the computer's USB port
Operating temperature range, °C: –10...50
Operating humidity range, %: 30–80%
Color/monochrome: color
Number of megapixels: 5
Maximum resolution, px: 2448x2048
Sensor size: 2/3" (8.45x7.07 mm)
Pixel size, µm: 3.45x3.45
Light sensitivity: 1146 mV with 1/30 s
Signal/noise ratio: 0.15 mV with 1/30 s
Exposure: 0.1 ms–15 s
Video recording: +
Frame rate, fps at resolution, px: 35@2448x2048; 50@1224x1024
Mounting location: trinocular tube, eyepiece tube (in place of the regular eyepiece)
Image format: *.jpg, *.bmp, *.png, *.tif
Video format: *.wmv, *.avi, *.h264 (Windows 8 or later), *.h265 (Windows 10 or later)
Spectral range, nm: 380–650 (IR-filtered)
Shutter type: ERS (electronic rolling shutter)
White balance: auto/manual
Exposure control: auto/manual
Software features: image size, brightness, exposure
Port: USB 3.0, 5 Gbps
System requirements: Windows 8/10/11 (32-bit and 64-bit), Mac OS X, Linux, Intel Core 2 up to 2.8 GHz or higher, minimum 2 GB RAM, USB 3.0 port, 17" or larger display
Software: MAGUS View
Mount type: C-mount
Body: cast aluminum
Power supply: DC 5 V from the computer's USB port
Operating temperature range, °C: –10...50
Operating humidity range, %: 30–80%
