MAGUS Bio VD350 LCD
83015
€
3899,95
MAGUS Bio VD350 LCD Biological Inverted Digital Microscope
With a camera and monitor. Magnification: 100–400x. Trinocular head, plan achromatic lenses, 30 W halogen illuminator, phase contrast condenser, Köhler illumination
The microscope is designed for studying liquid precipitates, cell colonies, living cells, tissue cultures, and other stained and unstained specimens in lab glassware. The inverted design of the microscope allows for the use of Petri dishes, multi-well plates, vials, roller bottles, and flasks up to 55mm with a bottom thickness of 1.2mm. The microscope uses special objectives for working with such glassware. The tilting stand of the illuminator enables you to observe cell cultures in tall Petri dishes or in cylindrical flasks up to 165mm. The transmitted light microscopy technique (brightfield and phase contrast) is used for studying samples. The trinocular tube/camera port enables the simultaneous connection of a monitor and camera. The microscope can be used for education, laboratory work, and research purposes. Areas of application: medicine, biotechnology, biology, virology, agriculture, ecology, toxicology, pharmacology, and others.
With a camera and monitor. Magnification: 100–400x. Trinocular head, plan achromatic lenses, 30 W halogen illuminator, phase contrast condenser, Köhler illumination
The microscope is designed for studying liquid precipitates, cell colonies, living cells, tissue cultures, and other stained and unstained specimens in lab glassware. The inverted design of the microscope allows for the use of Petri dishes, multi-well plates, vials, roller bottles, and flasks up to 55mm with a bottom thickness of 1.2mm. The microscope uses special objectives for working with such glassware. The tilting stand of the illuminator enables you to observe cell cultures in tall Petri dishes or in cylindrical flasks up to 165mm. The transmitted light microscopy technique (brightfield and phase contrast) is used for studying samples. The trinocular tube/camera port enables the simultaneous connection of a monitor and camera. The microscope can be used for education, laboratory work, and research purposes. Areas of application: medicine, biotechnology, biology, virology, agriculture, ecology, toxicology, pharmacology, and others.
###<iframe width="610" height="340" src="https://www.youtube.com/embed/TXhCymZWXqY?si=eNW4rAmXh5fyUE9X" frameBorder="0" allow="clipboard-write; autoplay" webkitAllowFullScreen mozallowfullscreen allowFullScreen></iframe>###
Digital camera
The MAGUS CHD30 digital camera is equipped with a 2MP sensor and produces realistic Full HD images at a resolution of 1920x1080px. The camera features high light sensitivity, auto focus function, and it is suitable for fluorescent observations.
The camera uses an HDMI interface to connect directly to a TV, monitor, or projector. In this mode, the camera operates autonomously without a connection to a PC. The HDMI interface provides a high and stable transfer rate from the camera to the external screen. You can connect it to a PC via Wi-Fi.
Video is recorded at 60fps or 25fps depending on the video output interface.
The camera combines high FPS and high bandwidth HDMI. Therefore, videos are vivid with no freezes or gaps between frames. At maximum resolution, the image is well-detailed, moving objects are visible without bugs, and object movement is displayed without delays.
Monitor
The MAGUS MCD20 Monitor is designed to use a visualization system of the MAGUS microscope.
It is connected to a camera mounted on the microscope to display real-time images. It supports MAGUS full HD resolution HDMI cameras.
The screen diagonal is 13.3 inches. The IPS matrix provides bright images with large viewing angles. If you look at the display at an angle, the color reproduction is not distorted.
The display can be placed on a folding stand on a table or shelf or mounted directly to the camera or microscope stand.
Microscope head
Tube length – infinity (∞). When assembling the microscope, the user can rotate the eyepiece tubes 180° and adjust the eye relief to fit their height. There is a trinocular microscope head. The monitor is mounted in the vertical tube of the trinocular head and the digital camera – into the camera side port. The trinocular head has a 50:50 or 100:0 beam splitter, and 100:0/0:100 on the body.
Revolving nosepiece
The 5-objective revolving nosepiece is mounted on a stand under the stage. You can install an additional phase objective in a free slot of the revolving nosepiece to achieve extra magnification for the phase-contrast method.
Objectives
Infinity plan achromatic objectives with a long working distance for dishes with a bottom thickness of 1.2mm. There are 3 objectives for the brightfield technique and one objective for the phase contrast technique.
Focusing mechanism
Coaxial coarse and fine focusing knobs are located at the base of the microscope on both sides. The user can place their hands on the table and take a relaxed pose while observing. The focusing adjustment is smooth and effortless. On the right, there is a coarse focusing lock knob for quick adjustments after changing the sample. On the left, there is a coarse tension adjustment ring for further adjustment.
Stage
There is a fixed stage with a mechanical attachment for moving the laboratory ware in two mutually perpendicular directions. The smooth and subtle movement of the object augments the accuracy of the study: No part of the specimen will be overlooked. The travel knob is located at the bottom, and so the user won’t strain the right wrist. The microscope set includes four dish holders for dishes of different sizes.
Condenser
Phase-contrast condenser with four positions. A free slot is used for brightfield microscopy. The other three slots with phase annuli plates are used for observing by way of objectives at magnifications of 10x, 20x, and 40x. The phase contrast rings can be centered. Fast and intuitive switching between the microscopy techniques saves time and simplifies the researcher’s work.
Light source
Halogen bulbs emit light with a color temperature that allows for comfortable work. The 30W bulb is bright enough to observe with all objectives that are used for brightfield and phase contrast microscopy techniques.
Köhler illumination
Setting up the Köhler illumination enhances the image quality of a specimen. With such illumination, you will achieve maximum resolution on each objective and even the illumination of the field of view with no darkening at the edges. The object of study is in sharp focus and the image artifacts are removed.
Accessories
There is a line of accessories designed specifically for this microscope. There are additional 20x and 40x phase objectives for studying 0.7µm and 0.4µm non-contrast objects. The eyepieces will extend the magnification range of the microscope. Additional eyepieces will help you use the full potential of an objective that is used more often. A digital camera that outputs the microscope image to a monitor, stores files, and software that takes real-time measurements of specimens. A calibration slide for measuring objects that can be combined with an eyepiece with a scale or the camera software.
The MAGUS CHD30 digital camera is equipped with a 2MP sensor and produces realistic Full HD images at a resolution of 1920x1080px. The camera features high light sensitivity, auto focus function, and it is suitable for fluorescent observations.
The camera uses an HDMI interface to connect directly to a TV, monitor, or projector. In this mode, the camera operates autonomously without a connection to a PC. The HDMI interface provides a high and stable transfer rate from the camera to the external screen. You can connect it to a PC via Wi-Fi.
Video is recorded at 60fps or 25fps depending on the video output interface.
The camera combines high FPS and high bandwidth HDMI. Therefore, videos are vivid with no freezes or gaps between frames. At maximum resolution, the image is well-detailed, moving objects are visible without bugs, and object movement is displayed without delays.
Monitor
The MAGUS MCD20 Monitor is designed to use a visualization system of the MAGUS microscope.
It is connected to a camera mounted on the microscope to display real-time images. It supports MAGUS full HD resolution HDMI cameras.
The screen diagonal is 13.3 inches. The IPS matrix provides bright images with large viewing angles. If you look at the display at an angle, the color reproduction is not distorted.
The display can be placed on a folding stand on a table or shelf or mounted directly to the camera or microscope stand.
Microscope head
Tube length – infinity (∞). When assembling the microscope, the user can rotate the eyepiece tubes 180° and adjust the eye relief to fit their height. There is a trinocular microscope head. The monitor is mounted in the vertical tube of the trinocular head and the digital camera – into the camera side port. The trinocular head has a 50:50 or 100:0 beam splitter, and 100:0/0:100 on the body.
Revolving nosepiece
The 5-objective revolving nosepiece is mounted on a stand under the stage. You can install an additional phase objective in a free slot of the revolving nosepiece to achieve extra magnification for the phase-contrast method.
Objectives
Infinity plan achromatic objectives with a long working distance for dishes with a bottom thickness of 1.2mm. There are 3 objectives for the brightfield technique and one objective for the phase contrast technique.
Focusing mechanism
Coaxial coarse and fine focusing knobs are located at the base of the microscope on both sides. The user can place their hands on the table and take a relaxed pose while observing. The focusing adjustment is smooth and effortless. On the right, there is a coarse focusing lock knob for quick adjustments after changing the sample. On the left, there is a coarse tension adjustment ring for further adjustment.
Stage
There is a fixed stage with a mechanical attachment for moving the laboratory ware in two mutually perpendicular directions. The smooth and subtle movement of the object augments the accuracy of the study: No part of the specimen will be overlooked. The travel knob is located at the bottom, and so the user won’t strain the right wrist. The microscope set includes four dish holders for dishes of different sizes.
Condenser
Phase-contrast condenser with four positions. A free slot is used for brightfield microscopy. The other three slots with phase annuli plates are used for observing by way of objectives at magnifications of 10x, 20x, and 40x. The phase contrast rings can be centered. Fast and intuitive switching between the microscopy techniques saves time and simplifies the researcher’s work.
Light source
Halogen bulbs emit light with a color temperature that allows for comfortable work. The 30W bulb is bright enough to observe with all objectives that are used for brightfield and phase contrast microscopy techniques.
Köhler illumination
Setting up the Köhler illumination enhances the image quality of a specimen. With such illumination, you will achieve maximum resolution on each objective and even the illumination of the field of view with no darkening at the edges. The object of study is in sharp focus and the image artifacts are removed.
Accessories
There is a line of accessories designed specifically for this microscope. There are additional 20x and 40x phase objectives for studying 0.7µm and 0.4µm non-contrast objects. The eyepieces will extend the magnification range of the microscope. Additional eyepieces will help you use the full potential of an objective that is used more often. A digital camera that outputs the microscope image to a monitor, stores files, and software that takes real-time measurements of specimens. A calibration slide for measuring objects that can be combined with an eyepiece with a scale or the camera software.
Key features of the microscope:
Key features of the camera:
- Studies of stained and unstained objects in lab glassware (Petri dishes, flasks, plates)
- Microscopy techniques: brightfield and phase contrast; Köhler illumination
- Tiltable stand for glassware up to 165mm
- Trinocular head with the option to adjust eye relief
- Two options for mounting a digital camera and monitor: vertical tube of the trinocular head and camera side port on the body; beam splitting on the trinocular head – 50:50, beam splitting on the body – 100:0/0:100
- Powerful 30W halogen transmitted light illuminator that provides bright natural light
- Phase contrast turret condenser for quick and convenient switching between the microscopy techniques
- The stage is equipped with a mechanical attachment for moving glassware along the X and Y axes, dish holders included in the set
- Additional accessories
Key features of the camera:
- The camera operates autonomously without a connection to a PC via the HDMI interface. It can be connected to a PC via USB2.0 interface
- The auto focus in HDMI mode makes it easier to adjust image sharpness
- The camera resolution is 1920x1080px – an ideal choice for displaying images on a Full HD monitor
- 60fps for observing moving objects, recording video and moving the preparation without jerkiness or delays
- 25fps via Wi-Fi – enough for focus adjustment and image processing using the software
- SONY color CMOS sensor – low noise level and high light sensitivity
- Software with photo, video recording, editing, external display functions, linear and angular measurements
- MAGUS CHD30 Digital Camera (digital camera, HDMI cable (1.5m), USB mouse, 32GB SD memory card, USB Wi-Fi adapter, AC power adapter 12V/1A (Euro), installation CD with drivers and software, user manual and warranty card)
- MAGUS MCD20 LCD Monitor
- Stand with the built-in power supply, transmitted light source, focusing mechanism, stage, condenser mount, revolving nosepiece, and trinocular tube
- Phase-contrast condenser
- Trinocular head
- Infinity plan achromatic objective: PHP2 10x/0.25 phase WD 4.27mm
- Infinity plan achromatic objective: PL 10x/0.25 WD 4.27mm
- Infinity plan achromatic objective: PL 20x/0.40 WD 8.0mm
- Infinity plan achromatic objective: PL 40x/0.60 WD 3.5mm
- Eyepiece 10x/22mm with long eye relief (2 pcs.)
- Eyecup (2 pcs.)
- Centering telescope
- Round stage plate
- Mechanical attachment for moving the specimen
- Dish holder (4 pcs.)
- C-mount camera adapter
- Color filter
- AC power cord
- Dust cover
- User manual and warranty card
Available on request:
- MAGUS MES10 10х/22mm Eyepiece with scale (D 30mm)
- MAGUS ME12 12.5х/14mm Eyepiece (D 30mm)
- MAGUS MD12 12.5х/14mm Eyepiece with diopter adjustment (D 30mm)
- MAGUS ME15 15x/15mm Eyepiece (D 30mm)
- MAGUS ME20 20х/12mm Eyepiece (D 30mm)
- MAGUS MD20 20х/12mm Eyepiece with diopter adjustment (D 30mm)
- MAGUS ME25 25х/9mm Eyepiece (D 30mm)
- MAGUS MP4 4х/0.10 ∞/0.17 Infinity Plan Objective
- MAGUS 20HP 20х/0.40 Plan L phase PHP2 ∞/1.2 WD 8.0mm Objective
- MAGUS 40HP 40х/0.60 Plan L phase PHP2 ∞/1.2 WD 3.5mm Objective
- Calibration slide
- MAGUS CFA050 C-mount Adapter
- MAGUS CFA065 C-mount Adapter
Microscope design: inverted
Image field: flat
Transmitted light microscopy techniques: brightfield, phase contrast
Microscope magnification, x: 100–400 basic configuration (*optional: 40–500/600/800/1000)
Tube length: infinity (∞)
Microscope head type: trinocular
Microscope head: Siedentopf, rotatable 180°
Inclination: 45°
Microscope head magnification, x: 1
Interpupillary distance, mm: 48–75
Eyepiece diameter, mm: 30
Eyepieces, x/field, mm: 10х/22mm, eye relief: 10mm (*optional: 10x/22mm with scale, 12.5x/14; 15x/15; 20x/12; 25x/9)
Revolving nosepiece: 5 objectives
Optical design: infinity plan achromatic objectives (∞), parfocal distance: 45mm
Objectives, x/aperture/working distance, mm: PL 10x/0.25/4.27; PL 20х/0.40/8.0; PL 40x/0.60/3.5; PHP2 10х/0.25/4.27 phase; (*optional: PL 4x/0.10/21.0; PHP2 20х/0.40/8.0 phase; PHP2 40x/0.60/3.5 phase)
Spring-loaded retractable assembly: 40х
Stage: 227x208mm, fixed, with glass plate Ø118mm and mechanical attachment; dish holders: 86x129.5, Ø90mm; 34x77.5mm, Ø68.5mm; 57x82mm, Ø60mm; 29x77.5mm, Ø35mm
Moving range, mm: 77/114
Condenser: NA 0.6, working distance: 55mm; phase contrast turret
Diaphragm: adjustable iris diaphragm
Focusing mechanism: coaxial coarse and fine focusing knobs located on both sides
Fine focusing scale value, μm: 2
Coarse focusing tension adjusting knob: +
Coarse focusing lock knob: +
Illumination: transmitted
Transmitted light source: halogen lamp: 12V/30W
Phase contrast device: phase contrast condenser (turret) with a free slot and phase annuli plates for 10x, 20x and 40x objectives; centering auxiliary microscope
Power supply, V/Hz: 220±22V/50Hz via an AC power supply
Operating temperature range, °C (°F): 5… 35 (41… 95)
Operating humidity range, %: 20… 80
Image field: flat
Transmitted light microscopy techniques: brightfield, phase contrast
Microscope magnification, x: 100–400 basic configuration (*optional: 40–500/600/800/1000)
Tube length: infinity (∞)
Microscope head type: trinocular
Microscope head: Siedentopf, rotatable 180°
Inclination: 45°
Microscope head magnification, x: 1
Interpupillary distance, mm: 48–75
Eyepiece diameter, mm: 30
Eyepieces, x/field, mm: 10х/22mm, eye relief: 10mm (*optional: 10x/22mm with scale, 12.5x/14; 15x/15; 20x/12; 25x/9)
Revolving nosepiece: 5 objectives
Optical design: infinity plan achromatic objectives (∞), parfocal distance: 45mm
Objectives, x/aperture/working distance, mm: PL 10x/0.25/4.27; PL 20х/0.40/8.0; PL 40x/0.60/3.5; PHP2 10х/0.25/4.27 phase; (*optional: PL 4x/0.10/21.0; PHP2 20х/0.40/8.0 phase; PHP2 40x/0.60/3.5 phase)
Spring-loaded retractable assembly: 40х
Stage: 227x208mm, fixed, with glass plate Ø118mm and mechanical attachment; dish holders: 86x129.5, Ø90mm; 34x77.5mm, Ø68.5mm; 57x82mm, Ø60mm; 29x77.5mm, Ø35mm
Moving range, mm: 77/114
Condenser: NA 0.6, working distance: 55mm; phase contrast turret
Diaphragm: adjustable iris diaphragm
Focusing mechanism: coaxial coarse and fine focusing knobs located on both sides
Fine focusing scale value, μm: 2
Coarse focusing tension adjusting knob: +
Coarse focusing lock knob: +
Illumination: transmitted
Transmitted light source: halogen lamp: 12V/30W
Phase contrast device: phase contrast condenser (turret) with a free slot and phase annuli plates for 10x, 20x and 40x objectives; centering auxiliary microscope
Power supply, V/Hz: 220±22V/50Hz via an AC power supply
Operating temperature range, °C (°F): 5… 35 (41… 95)
Operating humidity range, %: 20… 80
Sensor: SONY CMOS
Color/monochrome: color
Megapixels: 2
Maximum resolution, pix: 1920х1080
Sensor size: 1/1.9" (7.20x4.05mm)
Pixel size, μm: 3.75x3.75
Auto focus: +
Interface: HDMI 1.4, Wi-Fi
Memory card: SD up to 32GB
Option to mount additional equipment: mouse (USB), Wi-Fi adapter (USB)
Wi-Fi settings: 802.11n, 150Mbps, 20dBm
Light sensitivity: 1120mV with 1/30s
Signal/noise ratio: 0.15mV with 1/30s
Exposure: 0.06ms–918ms
Video recording: +
Frame rate, fps at resolution: 60@1920х1080 (HDMI); 25@1920х1080 (Wi-Fi)
Place of installation: trinocular tube, eyepiece tube instead of an eyepiece
Image format: *.jpg
Video format: *.asf
Spectral range, nm: 380–650 (with IR filter)
Shutter type: ERS (electronic rolling shutter)
System requirements: Windows 8/10/11 (32bit and 64bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 4GB RAM, USB2.0 port, CD-ROM, 19" or larger display
Software: HDMI: built-in; USB: MAGUS View
Mount type: C-mount
Body: CNC aluminum alloy
Power supply: DC adapter 12V, 1A
Specifications of the DC power adapter: input: AC voltage 100–240V, 50/60Hz; output: DC voltage 12V/1A
Operating temperature range, °C (°F): −10... 50 (14… 122)
Operating humidity range, %: 30… 80
Color/monochrome: color
Megapixels: 2
Maximum resolution, pix: 1920х1080
Sensor size: 1/1.9" (7.20x4.05mm)
Pixel size, μm: 3.75x3.75
Auto focus: +
Interface: HDMI 1.4, Wi-Fi
Memory card: SD up to 32GB
Option to mount additional equipment: mouse (USB), Wi-Fi adapter (USB)
Wi-Fi settings: 802.11n, 150Mbps, 20dBm
Light sensitivity: 1120mV with 1/30s
Signal/noise ratio: 0.15mV with 1/30s
Exposure: 0.06ms–918ms
Video recording: +
Frame rate, fps at resolution: 60@1920х1080 (HDMI); 25@1920х1080 (Wi-Fi)
Place of installation: trinocular tube, eyepiece tube instead of an eyepiece
Image format: *.jpg
Video format: *.asf
Spectral range, nm: 380–650 (with IR filter)
Shutter type: ERS (electronic rolling shutter)
System requirements: Windows 8/10/11 (32bit and 64bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 4GB RAM, USB2.0 port, CD-ROM, 19" or larger display
Software: HDMI: built-in; USB: MAGUS View
Mount type: C-mount
Body: CNC aluminum alloy
Power supply: DC adapter 12V, 1A
Specifications of the DC power adapter: input: AC voltage 100–240V, 50/60Hz; output: DC voltage 12V/1A
Operating temperature range, °C (°F): −10... 50 (14… 122)
Operating humidity range, %: 30… 80
Type of matrix: IPS
Screen diagonal, inch: 13.3
Resolution, pix: 1920x1080 (Full HD)
Aspect ratio: 16:9
Brightness, cd/m²: 400
Number of displayed colors: 16.7 m
Contrast: 1000:1
Horizontal/vertical viewing angle, °: 178/178
Size of the visible screen area (WxH), mm: 295x165
Pixel pitch (WxH), mm: 0.154x0.154
Display refresh rate, Hz: 60
Type of matrix backlight: LED
LED backlight lifetime, h: 50000
Interface: HDMI
Operating temperature range, °C (°F): −15... 55 (5… 131)
Operating humidity range, %: 10… 90
Power supply: AC 110–220V, DC 5–12V/1A (Type-C)
Power consumption, W: 12 (max.)
Screen diagonal, inch: 13.3
Resolution, pix: 1920x1080 (Full HD)
Aspect ratio: 16:9
Brightness, cd/m²: 400
Number of displayed colors: 16.7 m
Contrast: 1000:1
Horizontal/vertical viewing angle, °: 178/178
Size of the visible screen area (WxH), mm: 295x165
Pixel pitch (WxH), mm: 0.154x0.154
Display refresh rate, Hz: 60
Type of matrix backlight: LED
LED backlight lifetime, h: 50000
Interface: HDMI
Operating temperature range, °C (°F): −15... 55 (5… 131)
Operating humidity range, %: 10… 90
Power supply: AC 110–220V, DC 5–12V/1A (Type-C)
Power consumption, W: 12 (max.)
